Suspension Equipment for Guide Ropes - Long Loop Cappels
The standard supply of cappel is as shown in the photograph below and within reason the eye dimensions can be modified to suit any particular requirement.
Standard long loop cappel sizes are for ropes from 26 mm (1”) to 57 mm (2 1/4”) but cappels for ropes of greater diameter can be supplied. Cappel wedges can also be supplied with grooves to take ropes of smaller diameter than those shown in the table below.
The cappel limbs and bands are made from 1.5% manganese steel to BS 2772: Part 2: 1989, in the hardened and tempered condition. The wedges and four-bolt safety clamps are of mild steel to BS 4360: 1979, Grade 43A in the normalised condition.
All cappels are proof load tested to 2.5 times the safe working load and subjected to magnetic crack detection. Ultrasonic tests can also be carried out if required.
Operation, Maintenance & Assembly Instructions are available in English, French & Spanish.
General Data
Cappel for rope diameter |
Safe Working Load based on factor of safety 10:1 |
Approxiamate Weight when assembled |
|||||
|---|---|---|---|---|---|---|---|
mm |
in |
kg |
ton |
kg |
lb |
||
26 |
1 |
6096 |
6 |
23 |
50 |
||
29 |
1 1/8 |
6604 |
6 1/2 |
26 |
58 |
||
32 |
1 1/4 |
6604 |
6 1/2 |
34 |
74 |
||
35 |
1 3/8 |
7620 |
7 1/2 |
45 |
98 |
||
38 |
1 1/2 |
8128 |
8 |
54 |
120 |
||
41 |
1 5/8 |
9652 |
9 1/2 |
61 |
135 |
||
45 |
1 3/4 |
10668 |
10 1/2 |
79 |
175 |
||
48 |
1 7/8 |
12192 |
12 |
97 |
215 |
||
51 |
2 |
14732 |
14 1/2 |
122 |
270 |
||
54 |
2 1/8 |
20828 |
20 1/2 |
159 |
350 |
||
57 |
2 1/4 |
30480 |
30 |
249 |
550 |
||
For further information please contact us. Go to contacts...